EN
2015-2024 LEDFUL
Notes on The Modification and Change of Control Parts about Full-color LED Display

Notes on The Modification and Change of Control Parts about Full-color LED Display

Publish Time : Dec 26 2022

1. The zero and fire wires of the computer and the control part cannot be reversed, and should be plugged in strictly according to the original position. If there are peripherals, should test whether the case is charged after connection is complete.



2. When moving control equipment such as a computer, first check whether the connecting wires and the control board are loose before powering on.


3. Do not arbitrarily change the position and length of communication lines and flat connecting lines.


4. If abnormalities such as short circuit, tripping, burning wires, and smoke are found after moving, the power test should not be repeated, and the problem should be found in time.

5. Control the use time, it is recommended to rest for more than 2 hours a day, generally turn on the screen at least once a month, and light it for more than 2 hours.


6. Control the current of the screen. Do not stay in full-white, full-red, full-green, full-blue, etc. full-brightness screens for a long time during playback, so as not to cause excessive current and excessive heating of the power line, which may damage the LED lights and affect thelifespan ofdisplay screen.






Full-color LED display connection method Immersive Night Tour Economy


Related & Recommended Article
Related & Recommended LED Display Series
2015-2024 LEDFUL
Please contact our sales engineer to obtain password


2015-2024 LEDFUL Copyright © 2015-2024 LEDFUL All Rights Reserved
Privacy Policy Sitemap
Notice
Our website uses cookies to enhance the experience of users. By clicking“Accept" you are agreeing to our use of cookies. See our Privacy Policy to learn more.
Leam more Accept